Skip to content

Gallery

Photos and videos from flight tests, the workshop, exhibitions and competitions.

Latest on YouTube

  • Propulsion #1 | Introduction to Aircraft Propulsion Systems

  • Propulsion #2 | Electric Propulsion Components Explained

  • Propulsion #3 | Designing a UAV Propulsion System with eCalc

  • Eight club members together during the DBF design phase, November 2026.

  • Students work on an aircraft design at a laptop in the lab, November 2026.

  • The ICMTC 2026 team with the club's flag and the aircraft on the runway, July 2026.

  • The whole team lined up on the airfield, July 2026.

  • The team with the club's flag on the runway, July 2026.

  • Members carrying the aircraft across the airfield, July 2026.

  • Members checking the aircraft on the airfield, July 2026.

  • The aircraft in flight over the airfield, July 2026.

  • The aircraft on the runway, seen from the front, July 2026.

  • The aircraft on the runway, July 2026.

  • The aircraft on the runway, seen from above, July 2026.

  • The aircraft's M1 inspection sticker, marked Passed, July 2026.

  • Members talking a reviewer through the aircraft's build, July 2026.

  • Members working on the aircraft at the bench, July 2026.

  • Members at work on the aircraft in the team area, July 2026.

  • The team's ICMTC badges hung on a wing spar, July 2026.

  • Three members in the club's shirts beside the hangar, July 2026.

  • Team members with the aircraft at the airfield, July 2026.

  • A team member at a laptop beside the hangar, July 2026.

  • Team members carrying the aircraft's parts in a lift, July 2026.

  • The club's UAV in the air at sunset over October Airport, May 2026.

  • The aircraft climbing away against the evening sky, May 2026.

  • The flight-test team kneeling around their aircraft on the runway at October Airport, May 2026.

  • Members of the flight-test team with the aircraft on the runway, May 2026.

  • A member kneels behind the aircraft on the runway before a flight, May 2026.

  • Members prepare the aircraft on the runway, May 2026.

  • Members assemble the fuselage on a workbench, May 2026.

  • Fitting the motor and propeller in the workshop, May 2026.

  • A member wires electronics inside the laser-cut fuselage, May 2026.

  • Members in the lab during the build, May 2026.

  • Two members fit ribs into a wing in the lab, May 2026.

  • Three members in FlyTEC shirts in the workshop, May 2026.

  • Four FlyTEC members beside the club's stand at the Zewail City Project Exhibition 2026, July 2026.

  • Members talk visitors through the club's aircraft at the exhibition, July 2026.

  • Club members at the FlyTEC stand, University Innovation Summit, November 2026.